Multi Fuel Stoves With Back Boiler
A multi-fuel stove that has a back boiler is used to heat your home and provide hot water. They have 2 water ports (1x return and 1x flow) that are 1 inch BSP sized and can be connected using standard compression fittings.
Features
Multi fuel stoves with back boilers can be used to burn a variety of materials other than logs. This gives you greater choice of available sources of heat, which can help you save money and reduce the carbon footprint. This is possible because multi fuel stoves are designed to accept a larger range of materials and will use them more efficiently than wood burning stoves. In addition to standard logs multi fuel stoves equipped with back boilers are capable of burning smokeless coal, anthracite, and peat or turf briquettes. They can be fitted with a grate that is raised and moving bars or a central riddling grate and asphan, both of which will enable the stove to de-ash regularly. The ash is contained within an asphan under the combustion area to allow for safe and easy removal.
Boiler stoves offer an output of heat that ranges from to 21 kw (14kw for water heating and 7kw for space heating) according to the model chosen and can be connected into an accumulator tank for hot water or a conventional boiler system, allowing them to operate in conjunction with solar panels when needed. The boiler is situated inside the stove and is usually located on the back or side of the firebox. It is constructed of thick rolled steel, not fragile cast iron.
This means that it's built to withstand greater temperatures than cast iron stoves, and therefore is less susceptible to corrosion. The boiler can be pre-fitted or purchased separately. There are typically two pipes (or sometimes four) that extend from the rear of the stove to connect to plumbing pipes.
These pipes can be connected to a hot-water cylinder, or directly to the radiator circuit inside your home. Pumps are activated when the temperature of the tank's water exceeds certain levels. This will ensure that your radiators are heated first prior to the hot water for bathing and cooking is available - a great way of keeping bills low while protecting against freezing conditions in winter.
Benefits
The inclusion of a back boiler on multi fuel stoves provides additional benefits for heating your home. A multi-fuel stove that has back boilers can heat hot water in addition to the heat produced by burning wood or other solid fuels. As a result, you can reduce the amount of gas, electricity or oil you consume in your home, and reduce carbon emissions.
The heat generated by a multi fuel stove with back boiler is used to warm the cold water that flows into it through the bottom. The hot water can be used to heat the home, and even for bathing and domestic hot water taps.
When installed correctly, a boiler stove can be used to supply hot water for a smaller or larger central heating system or thermal store, giving you more energy efficiency and lower energy bills in your home. It can be used in conjunction with solar panels or underfloor heating to further reduce energy costs and carbon footprint.
A multi-fuel stove that has back boiler can be used to run a small, simple central heating system using wood, or to connect to an accumulator tank for hot water, making it a very flexible and cost effective way of heating your property. You can combine the log boiler and a back boiler with an existing gas central heating system in order to save money on installation and operating costs.
image source that are Eco Design 2022 compliant make use of up to six times less fuel than previous models and can help you save on your fuel costs as well as cutting the environmental footprint. There are a range of models available, from those that simply heat water to those that heat up to 22 radiators, and provide hot water for your entire household.
The majority of multi-fuel stoves that have back boilers come with a simple bolt in system. Two pipes are protruding from the back of stoves and are ready to be connected to plumbing pipework. Other models are equipped with a 'water jacket', where the body of the stove is an opening that can be filled with water and often with a pump that circulates the hot water.
Installation
The Ruben is a stunning stove with a huge ceramic window and silver door handles/controls and an integrated back-boiler for hot water and central heat (up to 7kw for water heating and 8kw room heating). The Ruben comes with two water ports located at the rear of the stove (one for flow and one for return) which are both size 1.0 inch BSP. It can be used with either vented or non-vented stoves.
A multi-fuel stove with a back boiler can be connected to central heating systems by with a simple non return valve or to an energy storage tank that has an overheat valve. A thermal storage tank is an insulated water tank that serves as a neutral point to the heat from the stove and stores it until it's required.
You should ensure whether your local authority allows the installation of a wood-burning fireplace with back boiler, and that insurance companies are satisfied with the installation. Also, check that your existing plumbing system can handle the additional power that's being generated. In most instances, you will need to replace the plumbing to make this possible.
If your installer has experience in this kind of work, they will be able to advise you on what is needed. Be wary of plumbers who claim to be heating engineers for solid fuel and may not understand the fundamentals involved in this type of system. Stovesellers has been asked several times to clean up the mess created by other tradesmen. We can only encourage you to choose a qualified engineer.
It is essential to know that you will need an extra large cylinder for a multifuel stove that has a back boiler and the heat output from the stove should be carefully match to the home in order to avoid running out of water and spending money. Divide the total cubic meter (length wide, width, and height) of the room by 14 to determine the model.
Maintenance
A multi fuel stove that has a back boiler is a heating appliance which can heat both hot water and radiators in your home. These types of stoves are ideal for those who live in smaller houses or wish to reduce their carbon footprint by not being so reliant on central heating systems that use gas.
The back boiler of these types of stoves is a large loop of pipe that connects the hot water tank and the radiators in your home. A thermostat in the house can monitor the temperature of this loop and when it is at a certain level the pump that powers the radiators will turn on automatically. This will ensure that your heating is properly controlled and prioritised.
A multi-fuel stove with a back boiler allows you to burn wood or coal. This gives you more flexibility when it comes to your heating source. However, it is important to keep in mind that the boiler isn't an energy source that is free and you will need to add the proper amount of logs to create enough heat for your requirements.
If you are installing a multi-fuel stove with back boiler, you must be sure to adhere to the safety guidelines for your region and country. This will include the distance and location of your stove relative to combustible surfaces. These guidelines are in the instruction manual for your stove or by referring to local codes.
The most common error that people make when installing a multi-fuel stove with back boiler is to not properly prepare the hearth for it. This can lead to a variety of problems later on and it is crucial to follow the proper procedures.
The best way to make sure that your multi fuel stove with back boiler is properly installed is by having it professionally installed by a registered heating engineer or HETAS technician. They can ensure that your stove is compatible with the existing system and also that it is in compliance with UK safety standards.